Model Number FE220-10N, Servobox Series Model FE220 1-Stage, 10 Ratio, and Solid Output Shaft Output Bearing Planetary Reducer Gearbox On Pelonis Technologies, Inc.

Integrated Planetary Arm Bracket
The planetary arm bracket and the output shaft are one-piece constructed to increase torsional rigidity and accuracy. The entire structure is machined for controlling accuracy in the specified tolerance.

Full Needle Roller Bearings Design
The planetary gear transmission employs full needle roller bearings without a retainer to increase the contact surface. This greatly improves structural rigidity and service life.

Unit of Measure

Specifications | Dimensions

Specifications

Brands	N/A Pelonis Technologies
Model	N/A 220
Ratio	N/A 10
Output Bearing	N/A Solid Output Shaft (No Keyway)
Stage	N/A 1-Stage
Rated Output Torque (Nominal Output Torque) (T_2N)	N/A 1140 N·m
Maximum Acceleration Torque (T_2B)	N/A 1.8 Times of Rated Output Torque
Maximum Output Torque (Emergency Stop Torque) (T_2NOT)	N/A 3 Times of Rated Output Torque
Rated Input Speed (n_1N)	N/A 2000 rpm
Maximum Input Speed (n_1B)	N/A 3000 rpm
Backlash	N/A ≤ 8 arc·min
Torsional Rigidity	N/A 220 N·m/arc·min
Maximum Radial Force (F_2rB)	N/A 35000 N
Maximum Axial Force (F_2aB)	N/A 17500 N
S5 Cycle Operation Service Life (L_H)	N/A >30000 hours
S1 Continuous Operation Service Life (L_H)	N/A >15000 hours
Efficiency (η)	N/A ≥ 97 %
Operating Temperature	N/A -25 to +90 ºC
Lubrication	N/A Synthetic Grease
Protection Class	N/A Ingress Protection (IP65)
Mounting Position	N/A Any
Noise Level	N/A ≤ 70 dB
Weight	N/A 54 kg
Weight Tolerance (±)	N/A 3 %
Mass Moments of Inertia	N/A 42.98 kg·cm²

Dimensions

Dimension A1	N/A 218 mm
Dimension A2	N/A M16 x P2.0
Dimension A3	N/A 75 mm
Dimension A4	N/A 180 mm
Dimension A5	N/A 13.5 mm15.5 mm
Dimension A6	N/A M16 x P2.0
Dimension A7	N/A 20 mm
Dimension A8	N/A 79.5 mm
Diameter B1	N/A 242 mm
Dimension B2	N/A 20 mm
Dimension B3	N/A 90 mm
Dimension B4	N/A 104 mm
Dimension B5	N/A 129 mm
Dimension B6	N/A 30 mm
Dimension B7	N/A 376.5 mm378.5 mm
Dimension C1	N/A 200 mm265 mm300 mm
Dimension C2	N/A M12 M16
Dimension C3	N/A 42 mm48 mm55 mm
Dimension C4	N/A 118 mm120 mm
Dimension C5	N/A 114.3 mm230 mm250 mm
Dimension C6	N/A M10 x P1.5
Dimension C7	N/A 222 mm250 mm265 mm

Specifications

Brands

Model

Ratio

Output Bearing

Stage

Rated Output Torque (Nominal Output Torque) (T2N)

Maximum Acceleration Torque (T2B)

Maximum Output Torque (Emergency Stop Torque) (T2NOT)

Rated Input Speed (n1N)

Maximum Input Speed (n1B)

Backlash

Torsional Rigidity

Maximum Radial Force (F2rB)

Maximum Axial Force (F2aB)

S5 Cycle Operation Service Life (LH)

S1 Continuous Operation Service Life (LH)

Efficiency (η)

Operating Temperature

Lubrication

Protection Class

Mounting Position

Noise Level

Weight

Weight Tolerance (±)

Mass Moments of Inertia

Dimensions

Dimension A1

Dimension A2

Dimension A3

Dimension A4

Dimension A5

Dimension A6

Dimension A7

Dimension A8

Diameter B1

Dimension B2

Dimension B3

Dimension B4

Dimension B5

Dimension B6

Dimension B7

Dimension C1

Dimension C2

Dimension C3

Dimension C4

Dimension C5

Dimension C6

Dimension C7

Rated Output Torque (Nominal Output Torque) (T_2N)

Maximum Acceleration Torque (T_2B)

Maximum Output Torque (Emergency Stop Torque) (T_2NOT)

Rated Input Speed (n_1N)

Maximum Input Speed (n_1B)

Maximum Radial Force (F_2rB)

Maximum Axial Force (F_2aB)

S5 Cycle Operation Service Life (L_H)

S1 Continuous Operation Service Life (L_H)